Handicap Bathroom Requirements

In some cases the available clear space can be supplemented by open space under a fixture to meet the minimum requirement.

Handicap bathroom requirements. A single wheelchair must be able to rotate freely inside a bathroom. The minimum size for a handicapped accessible bathroom floor space guidelines. Federal requirements for handicapped bathrooms floor space.

If it is in a stall the compartment. 30 inch by 48 inch access to the sink the door can t swing into this rectangle. Any area of the bathroom from the main floor to the shower should have at least 60 inches of clearance in all directions so the wheelchair and its user can move around freely.

The required minimum floor space for a handicapped accessible bathroom is 30 inches by 48 inches. Another grab bar 42 length is also used at 33 36 from the floor off. The center line of the toilet must be between 16 and 18 inches from the side.

This is 60 inches. The measurement starts from the point. The grab bars are located off the back wall 33 36 from the floor and are 36 width.

For a wheelchair to make a 180 degree turn it needs a space with a minimum 60 inch diameter. For single handicapped restrooms there must be a 60 diameter for a wheel chair in the room. For this kind of motion a clear floor space of at least 60 inches in diameter is required allowing a 180 degree turn.

If a toilet is provided at least one toilet must be handicap accessible.